Quartz-To-Metal Seal Assemblies
Standard Moly-Quartz Seals
Standard Moly-Quartz Seals are available in cup sizes from 1/2 inch to 2 inch as specified on the chart below. When ordering, please specify the proper part number, the hole size if desired, and whether the cup end should be cut off (specify cup length desired).
Standard Flange-Mounted Moly-Quartz Seals.
In a very exacting process, Moly-Cup seal assemblies are TIG welded to specially prepared standard vacuum flanges. These assemblies are available with windows set perpendicular, at a specified angle or as straight tubulations, 100 percent tested for vacuum tightness. Unless specified, windows will be supplied as commercial grade ground and polished quartz. Flatness is 10 waves and will be torch-fused, producing some edge distortion. Windows are normally 1/8 inch thick. Consult us directly for details. To aid in design, maximum bore through any transition will be approximately .100 inches less that the diameter of the Moly-Cup.For maximum seal sizes that can be welded or brazed into standard knife-edge type vacuum flanges, see table.
|
PRICE LIST DECEMBER 2006 QUARTZ SEAL ASSEMBLIES |
| Part # | Cup Dia | Cup Only | Std Seal | Open End Seal Only | Transition with Min Dia Flange | Suprasil Brewster | Quartz Window Thickness | Perpendicular Window |
| 1.33" Flange | ||||||||
| B1127S | 0.500 | $26.00 | $84.00 | $131.00 | $500.00 | $740.00 | 1/8" | $622.00 |
| 2.75" Flange | ||||||||
| B1190S | 0.750 | $63.00 | $166.00 | $240.00 | $638.00 | $877.00 | 1/8" | $765.00 |
| B1254S | 1.00 | $74.00 | $210.00 | $286.00 | $699.00 | $989.00 | 1/8" | $826.00 |
| B1317S | 1.25 | $90.00 | $270.00 | $357.00 | $775.00 | 1/8" | $928.00 | |
| B1381S | 1.50 | $114.00 | $398.00 | $500.00 | $867.00 | 1/8" | $1,122.00 | |
| 3.375" Flange | ||||||||
| B1381S | 1.50 | $114.00 | $398.00 | $500.00 | $903.00 | 3/16" | $1,163.00 | |
| B1413S | 1.625 | $138.00 | $459.00 | $530.00 | $933.00 | 3/16" | $1,188.00 | |
| B1444S | 1.750 | $166.00 | $525.00 | $556.00 | $964.00 | 3/16" | $1,239.00 | |
| 4.50" Flange | ||||||||
| B1508S | 2.00 | $209.00 | $581.00 | $622.00 | $1,122.00 | 3/16" | $1,352.00 | |
|
| |||||||||||||||||||||||||||||
| B1127 - STANDARD 1/2" MOLY CUP WITH OR WITHOUT HOLE | ||
| (Please specify hole size required) | ||
| 10 - 99 pcs | $25.50 | |
| 100 - 499 pcs | $20.50 | |
| 500 - 999 pcs | $15.00 | |
| 1000 - 4999 pcs | $12.25 | |
| 5000 - 9999 pcs | $9.95 | |
Export orders require prepayment unless other terms are arranged. Prices are in U.S. Dollars Prices subject to change without notice | ||
Bomco, Inc.
125 Gloucester Avenue
Gloucester, MA 01930-2254
Phone: 978-283-9000
Fax: 978-283-2882
E-Mail: custserv@bomco.com
MORE ABOUT PRECISION METAL FORMED PRODUCTS
Send mail to Bomco, Inc.